Product Specifications<\/h2>\n\n\n\n\nSpecification<\/th>\n Details<\/th>\n<\/tr>\n<\/thead>\n \n\nBrand<\/strong><\/td>\n<\/td>\n<\/tr>\n \nProduct Type<\/strong><\/td>\nUniversal CPE AN fuel line kit for custom automotive fluid systems<\/td>\n<\/tr>\n \nAvailable AN Sizes<\/strong><\/td>\n6AN \/ 8AN \/ 10AN<\/td>\n<\/tr>\n \nAvailable Hose Lengths<\/strong><\/td>\n16 ft (192 in) \/ 20 ft (240 in)<\/td>\n<\/tr>\n \nHose Inner Diameter<\/strong><\/td>\n6AN: 0.31 in \/ 8AN: 0.41 in \/ 10AN: 0.53 in<\/td>\n<\/tr>\n \nHose Outer Diameter<\/strong><\/td>\n6AN: 0.56 in \/ 8AN: 0.65 in \/ 10AN: 0.79 in<\/td>\n<\/tr>\n \nAN Hose-End Thread<\/strong><\/td>\n6AN: 9\/16-18 UNF \/ 8AN: 3\/4-16 UNF \/ 10AN: 7\/8-14 UNF<\/td>\n<\/tr>\n \nHose Construction<\/strong><\/td>\nCPE rubber inner tube, 304 stainless steel reinforcement, and black braided nylon outer cover<\/td>\n<\/tr>\n \nMaximum Working Pressure<\/strong><\/td>\n750 PSI<\/td>\n<\/tr>\n \nBurst Pressure<\/strong><\/td>\n2,250 PSI<\/td>\n<\/tr>\n \nWorking Temperature Range<\/strong><\/td>\n-22\u00b0F to 248\u00b0F (-30\u00b0C to 120\u00b0C)<\/td>\n<\/tr>\n \nHose-End Material<\/strong><\/td>\nAluminum alloy<\/td>\n<\/tr>\n \nHose-End Finish<\/strong><\/td>\nBlack<\/td>\n<\/tr>\n \nSwivel Function<\/strong><\/td>\n360-degree swivel for final hose-end orientation<\/td>\n<\/tr>\n \nIncluded Hose-End Angles<\/strong><\/td>\nStraight, 45-degree, 90-degree, and 180-degree<\/td>\n<\/tr>\n \nSwivel Hose-End Quantity<\/strong><\/td>\n10 total: 4 straight, 2 \u00d7 45-degree, 2 \u00d7 90-degree and 2 \u00d7 180-degree<\/td>\n<\/tr>\n \nAdditional Components<\/strong><\/td>\n2 dual-hose separator clamps, 1 adjustable 3AN\u201316AN wrench and 1 pair of protective gloves<\/td>\n<\/tr>\n \nCompatible Fluids<\/strong><\/td>\nNon-ethanol gasoline, diesel, compatible race fuel formulations, engine oil, coolant, antifreeze, transmission fluid, lubricants, hydraulic fluid, and vacuum applications<\/td>\n<\/tr>\n \nIncompatible Fuels<\/strong><\/td>\nDo not use with E10, E85 or methanol<\/td>\n<\/tr>\n \nTypical Applications<\/strong><\/td>\nExternal fuel supply and return lines, transmission cooler lines, coolant lines, vacuum lines, turbo oil-feed lines, and other compatible custom automotive fluid lines<\/td>\n<\/tr>\n \nInstallation Type<\/strong><\/td>\nCut-to-length custom assembly; not a vehicle-specific direct replacement<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nDescription<\/h2>\n<\/p>\n CPE AN Fuel Line Kit for Custom Fluid Systems<\/h2>\n
The CPE AN fuel line kit<\/strong> provides the hose, multi-angle swivel fittings, and basic assembly tools needed to fabricate cleanly routed external fuel and fluid lines. Available in 6AN, 8AN, and 10AN sizes with 16FT or 20FT hose options, it is designed for compatible custom fuel, oil, coolant, transmission, hydraulic, and vacuum applications.<\/p>\n\n- \nComplete fabrication package:<\/strong> Includes nylon-braided CPE hose, ten swivel hose ends, two separator clamps, an adjustable AN wrench, and protective gloves.<\/li>\n
- \nFlexible routing choices:<\/strong> Straight, 45-degree, 90-degree and 180-degree hose ends help route lines around pumps, filters, regulators, coolers and engine-bay components.<\/li>\n
- \nThree-layer hose construction:<\/strong> A CPE inner tube, stainless steel reinforcement, and braided nylon cover provide fluid resistance, pressure support, and exterior abrasion protection.<\/li>\n
- \nMultiple size and length options:<\/strong> Select 6AN, 8AN, or 10AN and either 16FT or 20FT to match the ports and routed length of the system.<\/li>\n<\/ul>\n
![\"](\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\")
<\/p>\n
What Is Included with the CPE AN Fuel Line Kit?<\/h2>\n\n- 16FT or 20FT nylon-braided CPE hose in the selected AN size \u00d7 1<\/li>\n
- Straight swivel hose ends in the selected AN size \u00d7 4<\/li>\n
- 45-degree swivel hose ends in the selected AN size \u00d7 2<\/li>\n
- 90-degree swivel hose ends in the selected AN size \u00d7 2<\/li>\n
- 180-degree swivel hose ends in the selected AN size \u00d7 2<\/li>\n
- Dual-hose separator clamps in the selected AN size \u00d7 2<\/li>\n
- 3AN\u201316AN adjustable AN fitting wrench \u00d7 1<\/li>\n
- Protective installation gloves \u00d7 1 pair<\/li>\n<\/ul>\n
Variant note:<\/strong> The hose, swivel hose ends, and separator clamps must all match the selected AN size. For example, a 6AN kit uses 6AN hose ends with 9\/16-18 UNF threads; it does not include a mixture of 6AN, 8AN, and 10AN fittings.<\/p>\nHow to Choose Between 6AN, 8AN and 10AN Fuel Line<\/h2>\n\n\n\n\nAN Size<\/th>\n Hose ID<\/th>\n Hose OD<\/th>\n AN Thread<\/th>\n Selection Guidance<\/th>\n<\/tr>\n<\/thead>\n \n\n6AN<\/strong><\/td>\n0.31 in<\/td>\n 0.56 in<\/td>\n 9\/16-18 UNF<\/td>\n Choose when the pump, filter, regulator, and other system ports are designed for 6AN plumbing.<\/td>\n<\/tr>\n \n8AN<\/strong><\/td>\n0.41 in<\/td>\n 0.65 in<\/td>\n 3\/4-16 UNF<\/td>\n Choose for a system specifically designed around 8AN ports and the corresponding flow requirement.<\/td>\n<\/tr>\n \n10AN<\/strong><\/td>\n0.53 in<\/td>\n 0.79 in<\/td>\n 7\/8-14 UNF<\/td>\n Choose for larger-port systems that specify 10AN hose and provide sufficient routing clearance.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nDo not choose an AN size from engine displacement or horsepower alone. Check the specifications of the fuel pump, filter, regulator, fuel rail, cooler, or other connected component, then match the hose size, fitting family, pressure requirement, and available routing space.<\/p>\n
CPE Hose Construction, Pressure and Fluid Compatibility<\/h2>\nThree-Layer Nylon-Braided CPE Hose<\/h3>\n
The hose combines a CPE rubber inner tube, 304 stainless steel wire reinforcement, and a black braided nylon cover. The stainless layer helps limit hose expansion under pressure, while the nylon exterior protects the reinforcement from ordinary abrasion during engine-bay and chassis routing.<\/p>\n
<\/p>\n
Working Pressure and Temperature Range<\/h3>\n
The hose is rated for a maximum working pressure of 750 PSI, a burst pressure of 2,250 PSI, and an operating temperature range of -22\u00b0F to 248\u00b0F. The complete system must remain below the lowest working-pressure rating of any hose, fitting, adapter, filter, regulator, or connected component.<\/p>\n
Compatible Fluids and Fuel Restrictions<\/h3>\n
This CPE hose is intended for the compatible fluids listed in the product specifications, including selected fuel, diesel, engine oil, coolant, antifreeze, transmission fluid, hydraulic fluid, and vacuum applications.<\/p>\n
Important compatibility note:<\/strong> Do not use this CPE hose with E10, E85, or methanol. The supplied information previously listed E15 as compatible while excluding E10; because those claims conflict, E15 compatibility should not be published unless it is confirmed by the product engineering or testing documentation.<\/p>\n
| Specification<\/th>\n | Details<\/th>\n<\/tr>\n<\/thead>\n | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brand<\/strong><\/td>\n| <\/td>\n<\/tr>\n | Product Type<\/strong><\/td>\n | Universal CPE AN fuel line kit for custom automotive fluid systems<\/td>\n<\/tr>\n | Available AN Sizes<\/strong><\/td>\n | 6AN \/ 8AN \/ 10AN<\/td>\n<\/tr>\n | Available Hose Lengths<\/strong><\/td>\n | 16 ft (192 in) \/ 20 ft (240 in)<\/td>\n<\/tr>\n | Hose Inner Diameter<\/strong><\/td>\n | 6AN: 0.31 in \/ 8AN: 0.41 in \/ 10AN: 0.53 in<\/td>\n<\/tr>\n | Hose Outer Diameter<\/strong><\/td>\n | 6AN: 0.56 in \/ 8AN: 0.65 in \/ 10AN: 0.79 in<\/td>\n<\/tr>\n | AN Hose-End Thread<\/strong><\/td>\n | 6AN: 9\/16-18 UNF \/ 8AN: 3\/4-16 UNF \/ 10AN: 7\/8-14 UNF<\/td>\n<\/tr>\n | Hose Construction<\/strong><\/td>\n | CPE rubber inner tube, 304 stainless steel reinforcement, and black braided nylon outer cover<\/td>\n<\/tr>\n | Maximum Working Pressure<\/strong><\/td>\n | 750 PSI<\/td>\n<\/tr>\n | Burst Pressure<\/strong><\/td>\n | 2,250 PSI<\/td>\n<\/tr>\n | Working Temperature Range<\/strong><\/td>\n | -22\u00b0F to 248\u00b0F (-30\u00b0C to 120\u00b0C)<\/td>\n<\/tr>\n | Hose-End Material<\/strong><\/td>\n | Aluminum alloy<\/td>\n<\/tr>\n | Hose-End Finish<\/strong><\/td>\n | Black<\/td>\n<\/tr>\n | Swivel Function<\/strong><\/td>\n | 360-degree swivel for final hose-end orientation<\/td>\n<\/tr>\n | Included Hose-End Angles<\/strong><\/td>\n | Straight, 45-degree, 90-degree, and 180-degree<\/td>\n<\/tr>\n | Swivel Hose-End Quantity<\/strong><\/td>\n | 10 total: 4 straight, 2 \u00d7 45-degree, 2 \u00d7 90-degree and 2 \u00d7 180-degree<\/td>\n<\/tr>\n | Additional Components<\/strong><\/td>\n | 2 dual-hose separator clamps, 1 adjustable 3AN\u201316AN wrench and 1 pair of protective gloves<\/td>\n<\/tr>\n | Compatible Fluids<\/strong><\/td>\n | Non-ethanol gasoline, diesel, compatible race fuel formulations, engine oil, coolant, antifreeze, transmission fluid, lubricants, hydraulic fluid, and vacuum applications<\/td>\n<\/tr>\n | Incompatible Fuels<\/strong><\/td>\n | Do not use with E10, E85 or methanol<\/td>\n<\/tr>\n | Typical Applications<\/strong><\/td>\n | External fuel supply and return lines, transmission cooler lines, coolant lines, vacuum lines, turbo oil-feed lines, and other compatible custom automotive fluid lines<\/td>\n<\/tr>\n | Installation Type<\/strong><\/td>\n | Cut-to-length custom assembly; not a vehicle-specific direct replacement<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n | Description<\/h2>\n<\/p>\n |
![\"](\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/A_PC_-1_fac7019b-f9f0-47f8-a281-8d2f260f8799.jpg?v=1787045183\")
<\/p>\n| AN Size<\/th>\n | Hose ID<\/th>\n | Hose OD<\/th>\n | AN Thread<\/th>\n | Selection Guidance<\/th>\n<\/tr>\n<\/thead>\n | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6AN<\/strong><\/td>\n| 0.31 in<\/td>\n | 0.56 in<\/td>\n | 9\/16-18 UNF<\/td>\n | Choose when the pump, filter, regulator, and other system ports are designed for 6AN plumbing.<\/td>\n<\/tr>\n | 8AN<\/strong><\/td>\n | 0.41 in<\/td>\n | 0.65 in<\/td>\n | 3\/4-16 UNF<\/td>\n | Choose for a system specifically designed around 8AN ports and the corresponding flow requirement.<\/td>\n<\/tr>\n | 10AN<\/strong><\/td>\n | 0.53 in<\/td>\n | 0.79 in<\/td>\n | 7\/8-14 UNF<\/td>\n | Choose for larger-port systems that specify 10AN hose and provide sufficient routing clearance.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n | Do not choose an AN size from engine displacement or horsepower alone. Check the specifications of the fuel pump, filter, regulator, fuel rail, cooler, or other connected component, then match the hose size, fitting family, pressure requirement, and available routing space.<\/p>\n CPE Hose Construction, Pressure and Fluid Compatibility<\/h2>\n |
![\"Three-layer](\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/A_PC_-2_60dbe0b1-1466-4cfd-8143-7347425d0ac4.jpg?v=1787045117\")
<\/p>\n![\"Package](\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/A_PC_-2_c944158b-d81e-4073-aecb-53cf26e4eb37.jpg?v=1787111480\")
<\/p>\n![\"Four-step](\"https:\/\/cdn.shopify.com\/s\/files\/1\/0590\/5403\/0984\/files\/A_PC_-3_AKJ0001043.jpg?v=1787111480\")
<\/p>\n","protected":false},"excerpt":{"rendered":"